ProTek R25 HD DJI ELRS 2.4G – BNF iFlight
PRODUCT DESCRIPTION
PRE-TUNED & PRE-SETUP:
Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
Please check our linked article on “How to disable Angle-Mode, activate Acro-Mode”
ProTek R25 BNF Specs:
*Motor: XING 1404 4600KV (LINK)
*Weight: 147.5g (without battery)
*Bottom plate thickness: 2.5mm
*Top plate thickness: 1.5mm
*Body Size: 143mm*158mm
*FC pattern: 25.5*25.5mm
*FPV cam spacing: 14mm
*Whoop F4 AIO 1.1(LINK)
*Propeller size: 2.5 inch
*Arm Thickness: 2.5mm
*Wheelbase: 113mm
Specifications:
AIO//Whoop AIO F4 V1.1 AIO
Mounting pattern: 25.5*25.5mm/φ3mm
Firmware Target: IFLIGHT_F411_PRO
Constant current: 20A，25A (Burst)
Config：IFLIGHT_F411_PRO.config
Connector: Micro-USB
ESC Firmware: Q-H-50
Current sensor: yes
BEC output: 5V 2A
ESC Telemetry: NO
Size: 30.5*30.5mm
MCU: STM32F411
BLHeli: BLHeli-S
Barometer: NO
Blackbox: 8MB
Gyro: BMI270
INA pad: nR2
Weight: 7.4g
Input: 2-4S
ProTek R25 HD Quad BNF Included Components and Parts
pre-built and tested Quadcopter
1 x ProTek R25 Frame
1 x Caddx Polar Vista Digital HD System Kit
1 x Albatross ipex LHCP 5.8g 75mm antenna
2 x Nazgul 2525 propeller (Set of 4 – Color May Vary)
1 x iFlight Lipo Strap 15*180mm (Color May Vary)
Important
The DJI Remote Controller is recommended for beginners since you won’t need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don’t choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.
- Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter.
- If you have none frsky transmitter,please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
Note:
All iFlight BNFs are tested before shipment to guarantee highest quality.
If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.
iFlight takes no responsibility for issues with DJI or Caddx 3rd party gear (Video transmitters, Goggles, Radios, etc) and must be directly reported to www.caddxfpv.com/pages/contact-us or www.dji.com/support.
Bewertungen
Es gibt noch keine Bewertungen.